Summer Pop: ECAA @ Ilan Dei Studio, Venice

Deborah Aschheim, Capitol No. 5 (Two Palm Trees), 2010

Ink on Dura-lar, 14 x 17 in. (35.6 x 43.2 cm)

DASCH058

Deborah Aschheim, Encounter Number 7, 2010

Ink on Dura-lar, 14 x 17 in. (35.6 x 43.2 cm)

DASCH071

Scott McMillin, Intersections, 2012

Salvaged autobody parts and acrylic on panel, 20 x 30 in. (50.8 x 76.2 cm)

SCMCM016

Scott McMillin, Road Less Traveled, 2012

Salvaged autobody parts and acrylic on panel, 30 x 40 x 2 in. (76.2 x 101.6 x 5.1 cm)

SCMCM003

Donnie Molls, Car Piles 3, 2012

Mixed media and oil on steel, 12 x 14 in. (30.5 x 35.6 cm)

DMOLL021

Donnie Molls, Toronado, 2012

Mixed media and oil on steel, 8 x 12 in. (20.3 x 30.5 cm)

DMOLL043

R. Nelson Parrish, Untitled, #65, 2012

Color, wood, fiberglass and bio-resin, 20 x 20 x 2 1/2 in. (50.8 x 50.8 x 6.4 cm)

RNP080

R. Nelson Parrish, Untitled, #67, 2012

Color, wood, fiberglass and bio-resin, 20 x 20 x 2 1/2 in. (50.8 x 50.8 x 6.4 cm)

RNP078

R. Nelson Parrish, Untitled, #46, 2011

Color, wood, fiberglass and bio-resin, 20 x 20 x 2 1/2 in. (50.8 x 50.8 x 6.4 cm)

RNP079

•

Lucas Reiner, Los Angeles Tree Series, On Venice Blvd, 2005

Monoprint and oil on paper, 13 x 10 1/2 in. (33 x 26.7 cm)

LR002

Lucas Reiner, Los Angeles Tree Series, On Western Blvd, 2005

Monoprint and oil on paper, 13 x 10 1/2 in. (33 x 26.7 cm)

LR003

Joni Sternbach, 10.02.08 #4 Kathy Gidget, 2010

Unique Tintype, 8 x 10 in. (20.3 x 25.4 cm)

A tin type is usually produced on a metallic sheet (not, actually, tin) instead of glass. The plate is coated with collodion and sensitized just before use, as in the wet plate process.

JSTERN050

Joni Sternbach, 10.02.12 #1 Christian, 2010

Unique Tintype, 8 x 10 in. (20.3 x 25.4 cm)

A tin type is usually produced on a metallic sheet (not, actually, tin) instead of glass. The plate is coated with collodion and sensitized just before use, as in the wet plate process.

JSTERN047

Joni Sternbach, 09.02.18 #5 Cori, 2009

Unique Tintype, 8 x 10 in. (20.3 x 25.4 cm)

A tin type is usually produced on a metallic sheet (not, actually, tin) instead of glass. The plate is coated with collodion and sensitized just before use, as in the wet plate process.

JSTERN053